Home › Furnace noises

Furnace Making Noise: Banging, Squealing, Rattling and What to Do

Updated November 2, 2026 · General information, not HVAC or gas-fitting advice

Published by Shane Turner, DARCA LLC · How we research

We may earn a commission from links on this page, at no extra cost to you. How we make money.

Gas smell, hissing, or a carbon monoxide alarm sounding? Stop reading and get out. Do not turn anything on or off and do not look for the cause. From outside, call 911 and your gas utility. Go back in only when responders say it is safe. Gas smell steps · CO alarm steps
The short answer: A bang or boom at startup is urgent: turn the furnace off and have a technician look at it before you run it again. Grinding or squealing means turn it off and do not keep restarting it. A rattle or whistle is often a loose panel or a clogged filter, which you can check with the power off. If you smell gas or a CO alarm sounds, leave and call 911.

This page uses one HVAC contractor's noise guide (Budget Heating) and ServiceMag, a trade publication. They are not independent safety agencies, so treat the urgency ratings as their view. Our own rule: when in doubt, turn it off and call.

Noise by noise

SoundLikely cause (Budget Heating)What it says to do
Bang or boom at startupDelayed ignition, or ducts expandingTreat it as urgent. Shut the system off and have a technician inspect it before you run it again.
Continuous clickingIgnition, relay or control issueHave it checked promptly. Prolonged misfires can damage components.
Grinding or scrapingBlower wheel rubbing the housing, or failing motor bearingsHigh urgency. Turn the furnace off and do not keep restarting it.
High-pitched squealA worn blower belt or failing bearingTurn the system off and keep it off until it is evaluated.
Humming or buzzingStressed electrical parts, such as a capacitor, relay or transformer, or a strained motorAddress it promptly. With a burning smell, smoke or tripped breakers, shut the system off and get a professional.
Rattling or clankingLoose panels, screws or duct connectionsLow urgency. Tighten accessible hardware with the power off and check that the blower door seats fully.
Whistling or whooshingAirflow restriction: clogged filter, closed registers or duct leaksReplace the filter, open the registers and check for leaks.

Source: Budget Heating, a heating contractor. It says to cut power before any inspection.

What you can safely check

  1. Cut power first. Budget Heating: "Before any inspection, cut power." Use the furnace switch or breaker.
  2. Replace a dirty filter. See how to change a furnace filter.
  3. Open the registers and clear anything blocking them (Budget Heating).
  4. Make sure the blower door is seated and panels are tight (Budget Heating).

Stop there. Budget Heating lists electrical work, gas or combustion parts and refrigerant as jobs for licensed technicians, and lists a suspected cracked heat exchanger as a reason to stop DIY troubleshooting. ServiceMag says a high-limit switch that keeps tripping on a clean filter needs a technician to look for an airflow or heat exchanger problem. See what a cracked heat exchanger means.

If there is a smell or an alarm

Budget Heating says if there is a gas smell, smoke or a CO alarm: turn the furnace off, evacuate, and call your gas utility and emergency services from outside. See gas smell steps.

Need a new filter?

Match the size printed on the old filter's frame. Check your furnace manual before choosing a high MERV rating.

How to change itSee furnace filtersOrder by size at FiltersDelivered

Noise did not stop?

Gas, burner, ignition and venting problems are for a licensed HVAC technician. Our guide covers which signs mean call now.

When to call an HVAC technicianFind a licensed HVAC pro near you

Common questions

Is a banging furnace dangerous?

Budget Heating says to treat any ignition-related boom as urgent: shut the system off and have a technician inspect it before running it again.

Why is my furnace squealing?

Budget Heating says usually a worn blower belt or failing bearing. It says to switch the system off and keep it off until it is evaluated.

What causes a whistling furnace?

Budget Heating says usually airflow restriction from a clogged filter, closed registers or duct leaks.

Related guides

Sources
  1. Budget Heating (HVAC contractor): What to Do If Your Furnace Is Making a Loud Noise
  2. ServiceMag (trade publication): Furnace Blowing Cold Air
  3. NFPA: Get to Know Carbon Monoxide Alarms

Free printable: No-Heat Night Checklist

Safety first, then the checks anyone can do and how to stay warm if the furnace stops. Download the one-page PDF now. Want more? Leave your email and we'll send new guides and seasonal reminders now and then.

Download the PDF



DARCA LLC sends the emails. You can unsubscribe in one click. We never sell your address. Privacy.