Home › Runs but house is cold
Furnace Runs but the House Stays Cold: Causes and Safe Checks
We may earn a commission from links on this page, at no extra cost to you. How we make money.
This page covers a furnace that is running but not keeping up. If the air coming out is cold, see furnace blowing cold air. If it shuts off after a short run, see short cycling.
Checks you can do
- Thermostat. Set to Heat, with a setting above the room temperature. Set the fan to AUTO. ServiceMag says a fan left on ON pushes unheated air between heat cycles.
- Filter. ENERGY STAR says to check the filter monthly in winter and replace it at least every three months. ServiceMag says a clogged filter weakens airflow and can trip the high-limit switch, which shuts the burners off.
- Registers and returns. Open them and clear furniture and rugs away (ServiceMag).
- Thermostat location. ENERGY STAR says to place a thermostat away from registers, appliances, lighting, doorways, fireplaces, skylights, windows and direct sun or drafts. Interior walls are best.
Why a running furnace may still not keep up
| Cause | What the sources say | Who fixes it |
|---|---|---|
| Poor airflow from the duct system | Erie Institute lists blocked, disconnected or crushed duct runs, duct leakage, too few return air vents, undersized vents or oversized ductwork, and dirty filters. | A licensed HVAC technician |
| Leaky or uninsulated ducts | ENERGY STAR says sealing and insulating ducts, especially in attics or crawlspaces, can improve HVAC efficiency by as much as 10%. | A technician or duct contractor |
| High-limit switch tripping | ServiceMag: restricted airflow causes overheating. If it keeps tripping on a clean filter, a technician should check for a larger airflow or heat exchanger problem. | A technician |
| Clogged condensate line (high-efficiency furnaces) | ServiceMag: a backed-up drain can trigger a safety lockout. Call a technician if the furnace will not reset. | See condensate line problems |
| Furnace too old or worn out | ENERGY STAR says to have equipment evaluated if it is more than 10 years old or not keeping the house comfortable. | See repair or replace |
We found no agency source that gives a rule for how many degrees a furnace should raise the house per hour, so we give none.
Do not
- Do not open the burner area or touch gas parts. See when to call a technician.
- Do not use a gas oven or stovetop to make up the heat. See no heat tonight.
Need a new filter?
Match the size printed on the old filter's frame. Check your furnace manual before choosing a high MERV rating.
How to change itSee furnace filtersOrder by size at FiltersDeliveredStill cold after the checks?
Gas, burner, ignition and venting problems are for a licensed HVAC technician. Our guide covers which signs mean call now.
When to call an HVAC technicianFind a licensed HVAC pro near youCommon questions
Why does my furnace run but not heat the house?
Poor airflow is a common cause: a dirty filter, blocked registers, or duct problems such as leaks, crushed runs and too few returns (Erie Institute, ServiceMag).
How often should I check the furnace filter?
ENERGY STAR says to check it monthly in winter and replace it at least every three months.
Related guides
- Furnace blowing cold air
- Furnace short cycling
- Furnace condensate line problems
- Programmable thermostat settings
Free printable: No-Heat Night Checklist
Safety first, then the checks anyone can do and how to stay warm if the furnace stops. Download the one-page PDF now. Want more? Leave your email and we'll send new guides and seasonal reminders now and then.